Featured Products
- Automatic Measuring Machine (1)
- Cutting Machine (1)
- Characteristic Impedance Measuring Equipment (1)
Contact Information
Tel:86-769-88985064
Fax: 86-769-88985777
- Home
- Featured Products
- Hole Checker
Hole Checker
Model: JK3200
Category: Machines & Equipments for PCB / PCB Testing Equipment / High-Speed Hole Counter
Characteristics
Usage
ASIDA-JK3200 Inspection Hole Machine is used to inspect completed PCBs for drill-hole defects. The number and quality of drilled holes is checked and the board is assigned to be either OK or NG, the resulting PCBs are sorted accordingly.
Characteristics
User friendly interface, no special training required.
Long bar LED light source.
Detection speed can reach up to 12.5m/min.
30 degree angle detection range, inputted boards can be off centre by up to 30 degrees.
Capable of checking two boards simultaneously.
Network maintenance function, can link to other systems to display OK/NG information.
Personalised software designed to specific customer requirements.?
Specs
Technical parameters
item |
Specification |
Model |
JK3200 |
Range of pore size |
0.15~10mm |
Board size |
100×150mm~630×650mm |
PCB thickness |
0.3~10mm |
The maximum number of holes |
No limit |
Inspection speed |
3.5~12.5m/min |
Inspection accuracy |
±40µm |
Hole tolerance |
±40µm |
The Minimum Hole Margins |
≥0.15mm |
Inspection method |
Closed CIS measurement |
Inspection light source |
LED light source |
Power requirements |
AC220V 50Hz |
Machine size |
3550mm×1200mm×1100mm(L×W×H) |
Pressure capacity requirements |
0.5~0.7Mpa |
Weight |
400kg |
Featured Products