Featured Products
- Automatic Measuring Machine (1)
- Cutting Machine (1)
- Characteristic Impedance Measuring Equipment (1)
Contact Information
Tel:86-769-88985064
Fax: 86-769-88985777
- Home
- Featured Products
- UV Laser Cutting Machine JG16
UV Laser Cutting Machine JG16
Model: ASIDA-JG16
Category: Equipment for FPC / Equipment for FPC / FPC Puncher Machine
Characteristics
USAGE
Drilling blind holes, via holes in HDI board, blind cut and blind slot in rigid-flex board. Cutting a variety of FPC and cover layer, low carbonization. Cutting FPC and copper substrate thickness up to 1 mm, smooth appearance. Precisely etching of functional film. Cutting the base material.
CHARACTERISTIC
1. Safe and reliable. Fully enclosed design, automatic control of worktable door to ensure safe operation;
2. Automation. Auto focus, auto-correction, auto-positioning, auto-homing, automatic spot compensation, and intelligent design;
3. Energy measuring. Automatically measure energy on the samples;
4. High drilling / cutting precision. Using ultra-high-precision scanning galvanometer, fully guaranteed drilling, cutting accuracy and quality;
5. Multi-panels cutting. With function to cutting array panels;
6. Optical optimization. High peak power and high pulse energy, fine focal spot, ensure cutting and drilling with high speed and high precision;
7. Convenient operation. Drilling and cutting with independent module, easy conversion;
8. Optimize design. Optimization of laser processing path function, reduce processing time and improve efficiency
Specs
ITEM |
SPECIFICATION |
MODEL |
JG16 |
Laser Source |
UV,355nm, All-solid-state UV laser device, wavelength 355nm |
Laser Power |
8W/30KHz |
Laser Frequency |
30-120KHz |
Maximum Processing Size |
500x400mm(Double working table) |
Platform Maximum Operating Speed |
24m/min |
Platform Maximum Positioning Accuracy |
±5µm |
|
±2µm |
System Processing Precision |
±25µm |
Cutting Line Width |
20±5µm |
Cutting Thickness |
<1.0mm |
File format |
Gerber & .DXF & .lay,G(CAM)Standard G code(Can switch via CAM) |
Power |
AC220V 50Hz/2.5KW,AC380V 50Hz/5.5KW |
Vacuuming Requirements |
516m³/h |
Overall Dimensions |
1780x1680x1560mm |
Weight |
2500Kg |
Environmental Temperature |
20±2° |
Environmental Humidity |
<60%RH No dew |
Ground Amplitude |
<5µm |
Ground Pressure |
>1000kgf/m² |
Industry-specific control machine, with computer pre-installed drilling and cutting software |
Motion controller and industrial personal computer control mode. |
Featured Products