• 

  X-RAY Inspection Equipment

   

  Model:AX8200MAX

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / X-Ray Automatic Inspector

  Specs: Applications 1. Semiconductor, SMT, DIP, LED, battery, electronic components inspection. 2. IC, BGA, CSP, Flip-chip flow inspection. 3. Inspecting for Automotive parts, casting parts inspection etc. 4. Inspecting for photovoltaic industry, molded plastics, ceramic products, etc.

  Supplier: TAIWAN KONG KING CO., LTD. (TKK)

   

  3 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  SuperGauge measuring machine

   

  Model:268-1XF-32E

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / 2D And 3D Measuring Machine

  Specs: SuperGuage is designed specially for solving the problems caused by dimension variation between artwork and the board over production processes. It is capable of measuring, analyzing, adjusting and calibrating the distance between pinholes, measuring trace width and space on artwork, and providing c

  Supplier: BARMU TECH LTD.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  Bruker Non-contact Optical Profiler /

   

  Model:Bruker ContourGT

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / 2D And 3D Measuring Machine

  Specs: ContourGT Surface Measurement Systems - Non-contact Optical Profiler for QC/QA and research ContourGT? series products combine with advanced bits, multi core operation and analysis software, patented white light of the interferometers (WLI) hardware, and easiest operation, is the most advanced deve

  Supplier: TELTEC SEMICONDUCOTR PACIFIC (TAIWAN) LTD.

   

  2 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  Bruker Dektak Stylus Profilers

   

  Model:Dektak

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / 2D And 3D Measuring Machine

  Specs: The DektakXTR stylus profiler features a revolutionary design that enables unmatched repeatability of 4A and up to 40% improved scanning speeds. This major milestone combined with its other breakthroughs, uniquely enable the DektakXT to perform the critical nanometer-level film, step and surface mea

  Supplier: Teltec Pacific Ltd

   

  2 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  Temperature measuring line

   

  Model:TTK-30、TTK-36、GGK-30、GGK-36

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / Probe

  Specs: The most fundamental difference between TT-K and GG-K is the insulation material. Teflon (PTFE) has a maximum temperature resistance of 260℃, suitable for temperature profile measurements in standard reflow ovens; glass fiber has a maximum temperature resistance of 480℃, suitable for wave soldering

  Supplier: JIAHON PRECISION CO., LTD.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  X-RAY FLAT PANEL DETECTOR

   

  Model:0606HR

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / X-Ray Automatic Inspector

  Specs: Flat panel detectors (FPDs) are digital radiography (DR) devices that either convert x-rays into an electric charge (direct conversion) or light (indirect conversion) which is then read out through TFTs (Thin Film Transistors). The imaging principles used in FPDs are similar to those of imaging sens

  Supplier: ACURI TECHNOLOGY CO., LTD.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  Automatic Optical Inspection

   

  Model:InsPro40S

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / Automacie Optical Inspector

  Specs: ● World first 7um/7um Line/Space inspection ● World best Hybrid CSL illumination system ● High productivity under mass production ● Intuitive setup conditions and inspection specs ● Short setup time for new job ● Compatibility for mass production and engineering test ● Cost saving with easy & low co

  Supplier: Takewin International Co., Ltd.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  WEVE Raman Microscopy / High-Resolution Materials Analysis Solution

   

  Model:MantaRay / StingRay Raman Microscopy

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / Automacie Optical Inspector

  Specs: "From Failure Analysis to Materials Development: Beyond the Limitations of Traditional Optical Microscopy and EDS!" The WEVE Raman microscope is designed for precision inspection in the PCB industry. Without damaging the sample, it can identify micron-level organic contaminants, residual

  Supplier: Kingyoup Enterprises Co., Ltd.

   

  2 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  Micro-force type

   

  Model:FS1M、FSCU

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / Testing Tool

  Specs: Capable of detecting and measuring a minute force at a μN (mgf) level with high sensitivity. Being lightweight and compact, this sensor is optimal for research and development and installation into equipment. Supports customization such as a change of the shape or the sensitivity.

  Supplier: KUANG YI TECHNOLOGY Co,Ltd.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire
• 

  PCR Socket

   

  Model:PCR Clamshell Socket

  Category: Components and Assemblies / Testing & TQC for Assembly & SMT / Testing Tool

  Specs: Pressure Conductive Silicone Rubber (PCR) is a common contact solution for IC package testing. It operates through a matrix of conductive particles uniformly dispersed within a silicone base. Under compression, these particles align to create a low-impedance path, establishing a stable electrical co

  Supplier: DediProg Technology Co., Ltd.

   

  1 Testing & TQC for Assembly & SMT Related Products

  Inquire

| 1 | 2 | 3 | 4 | 5 |