Contact Information

Inquire Now

Tel: +886-4-23593363

Fax: +886-4-23593368

More Info

Home
Featured Products
Roll to Roll Automatic Punching Machine

Enlarge Image

Roll to Roll Automatic Punching Machine

Model: R2-1000

Category: Equipment for FPC / Equipment for FPC / FPC Puncher Machine

Inquire Now

Characteristics

1. WORK AREA : W250*L510 mm
2. SUITABLE MATERIAL: FPCB, PET, PC, film, membrane panel, etc.
3. PROCESS SPEED: 0.38 sec/hole (At pitch Y=5mm, Y axis linear travel, base on COMWEB standard film and FPCB)
4. PROCESS ACCURACY: ±25 μm compare to the print mark
5. PROCESS THICKNESS: 0.04~0.30mm FPC, the other thickness depending on materials.
6. PUNCH SIZE: Standard Φ2, Φ3, Φ3.175 mm (Particular size can be customize)
7. MONITOR: TFT 15” LCD
8. CCD CAMERA VIEW RANGE: FOV ABOUT 6.4*4.8mm. 256 Levels Monochrome
9. ILLUMINATION: One set white transparent light
10. CENTER PROCESS: The CCD camera can recognize targets after the program teach the target coordinate
11. SELF-ACCURACY CHECKING: CPK bar chart to analyze the process accuracy
12. FLAT MATERIAL: The tension flat structure
13. EDGE POSITION CONTROLLER: DPI 0.1mm, edge position about 0.5mm
14. AIR EXPANDING SHAFT: Diameter 6” (optional: 3”), transmission shaft internal diameter 35mm.
15. AIR PRESSURE SUPPLY: ABOVE 5HP, dry and dust-disposal clean air
16. POWER: Single-phase AC220V ±5% 1KVA 50/60Hz
17. MACHINE WEIGHT: About 1500kgs
18. MACHINE SIZE: W201*D143*H177 cm

Specs

1. WORK AREA : W250*L510 mm

2. SUITABLE MATERIAL: FPCB, PET, PC, film, membrane panel, etc.

3. PROCESS SPEED: 0.38 sec/hole (At pitch Y=5mm, Y axis linear travel, base on COMWEB standard film and FPCB)

4. PROCESS ACCURACY: ±25 μm compare to the print mark

5. PROCESS THICKNESS: 0.04~0.30mm FPC, the other thickness depending on materials.

6. PUNCH SIZE: Standard Φ2, Φ3, Φ3.175 mm (Particular size can be customize)

7. MONITOR: TFT 15” LCD

8. CCD CAMERA VIEW RANGE: FOV ABOUT 6.4*4.8mm. 256 Levels Monochrome

9. ILLUMINATION: One set white transparent light

10. CENTER PROCESS: The CCD camera can recognize targets after the program teach the target coordinate

11. SELF-ACCURACY CHECKING: CPK bar chart to analyze the process accuracy

12. FLAT MATERIAL: The tension flat structure

13. EDGE POSITION CONTROLLER: DPI 0.1mm, edge position about 0.5mm

14. AIR EXPANDING SHAFT: Diameter 6” (optional: 3”), transmission shaft internal diameter 35mm.

15. AIR PRESSURE SUPPLY: ABOVE 5HP, dry and dust-disposal clean air

16. POWER: Single-phase AC220V ±5% 1KVA 50/60Hz

17. MACHINE WEIGHT: About 1500kgs

18. MACHINE SIZE: W201*D143*H177 cm

Page Top

供應商等級

Featured Products

Related Products

CCD Full Automatic Trimming Machine

Full Automatic Trim Press Machine

High Speed Automatic L/UL Guide Hole Puncher